Yacht · Narrowboat · Motor cruiser

A mattress cut to your berth. Made in 24 hours, not 6 weeks.

V-berths, tapered aft cabins, two-piece and three-piece for the companionway, 10–12 cm low profile. Marine cover with breathable sides and nylon zips. Price on screen, no quote to wait for.

Made and dispatched within 24 working hours. Mon–Fri, cut-off 3 pm UK time. At your door in 4–6 working days.

Cut sheet · plan view

200 cm 150 cm 40 cm PORT STBD 2 PIECES
Bavaria 37 V-berth · 200 × 150 → 40 × 12 cm
Reflex 35 kg/m³ · tapered · 2 pieces · marine cover
£519

Includes VAT, delivery and import duties. Nothing is added at checkout or at the door.

24 h
from order to courier, guaranteed Mon–Fri
4–6
working days to your door, UK mainland, free
2–6 wk
what UK made-to-measure specialists typically quote
£0
at the door — duties and VAT already paid

Shapes we cut every day

Pick the shape, type the numbers, see the drawing and the price.

V-berth / tapered Forepeak. Width at head, width at foot — we draw the taper.+ £35 Aft cabin corner Angled cut following the hull. Left or right.+ £35 2 or 3 pieces Fits through the companionway. Reach the lockers underneath.+ £45 Cut-out Around a bulkhead, mast post or engine box.+ £35

Also: rounded corners, round, two widths. Depths from 10 cm for low-headroom berths. Any length up to 300 cm. Every mattress ships rolled, so it goes down the companionway in the box.

How it works

Three steps. No tape-measure anxiety.

01

Measure the berth at mattress height

Hull sides slope, so measure the width where the top of the mattress will sit, not at the base. Our guide shows exactly where on a V-berth and an aft cabin. Boat in the library? Pick it and the shape is pre-drawn.

02

Check the drawing, order

The configurator draws your berth to scale with every dimension on it. The drawing goes on your order confirmation. That is what we cut.

03

Cut tomorrow, aboard next week

Cut, sewn and roll-packed within 24 working hours in our own factory. Courier to your door or the marina office in 4–6 working days. Unroll, 2 hours, done.

Fit guarantee

If it does not match the drawing you approved, we remake it free.

Made-to-measure means it is yours — it is cut for one bed and cannot go back on sale, so the 100-night trial and the 14-day cancellation right do not apply. What does apply: we cut exactly what is on your drawing, we weigh and photograph it before it is rolled, and if your measurements were wrong we remake it at half price.

Marine reflex
35 kg/m³ open-cell · dries, does not hold water
included
Marine cover
Breathable mesh sides, nylon zips that will not corrode, removable, 40 °C wash
+ £60
3D spacer underlay
Air gap under the mattress — stops condensation and mould on the berth board
+ £48
Memory top
50 kg/m³ memory on a reflex core — for 15 cm and deeper
+ £55

Boat library

Bavaria, Jeanneau, Beneteau, Westerly, Hanse, narrowboat cross-beds — pick the boat and the berth is pre-drawn.

Bavaria 37 V-berthJeanneau Sun Odyssey 36iBeneteau Oceanis 38 aftWesterly CentaurHanse 345Narrowboat cross-bed 4ftNarrowboat fixed doubleBroom 37 aft cabin+ your boat — we add it

Price on screen in 60 seconds

Build your boat mattress now. Cut tomorrow, aboard before the weekend after.

Order before 3 pm UK time, Monday to Friday · Made in our own factory · Duties and VAT paid

Questions boat owners ask

Will a rolled mattress fit through the companionway?

Yes — every mattress leaves roll-packed in a box about 40 cm across. A two-piece mattress arrives as two rolls. Unroll on the berth, give it 2 hours, zip the pieces together under one cover if you chose that.

Can you do 10 cm or 12 cm?

Yes. Low-headroom berths get 10–12 cm reflex in a higher density so it does not bottom out. Under 15 cm we do not fit a memory layer; it would be too thin to feel.

Why a marine cover and not the standard one?

Mesh sides let the foam breathe so moisture escapes instead of sitting under you; nylon zips do not corrode in salt air. For a boat that lives afloat we also recommend the 3D spacer underlay, which keeps an air gap between the berth board and the mattress.

Will it really be dispatched within 24 hours?

Yes, on working days. Orders placed Monday to Friday before 3 pm UK time are cut, sewn, roll-packed and handed to the courier by the next working day. We are the factory, so there is no supplier to wait for. If we miss it, you get £50 back.

Do I pay anything on delivery?

No. Import duties and UK VAT are paid by us before the parcel leaves. The price you see is the price you pay — nothing is added at checkout or at the door.

What if my measurements are wrong?

The drawing on your order confirmation is what we cut. If the mattress does not match that drawing, we remake it free. If the drawing was right and the bed was measured wrong, we remake it at 50%.

Can I return it?

A made-to-measure mattress is cut for one bed and cannot be resold, so the 100-night trial and the 14-day cancellation right do not apply (Consumer Contracts Regulations 2013, reg. 28(1)(b)). Your rights for faulty or misdescribed goods are unaffected.